There’s no single best floor for every Northwest home. The right choice depends on the room, what’s underneath it (a wood subfloor, a concrete slab or a basement), who lives in the house — kids, dogs, both — and how long you plan to stay.
The short version: LVP for wet-prone rooms and busy households, engineered hardwood for real wood with more stability, solid hardwood for long-term value and refinishing, and laminate for an affordable wood look in dry living spaces. The details below will help you decide room by room.
Luxury vinyl plank (LVP)
LVP is a layered vinyl product with a printed wood look and a clear wear layer on top. Most current products have a water-resistant or waterproof core, which makes them a strong choice for kitchens, bathrooms, laundry rooms and basements.
- Pros: handles spills and wet paws, comfortable and quiet with the right underlayment, wide range of looks, good scratch resistance on products with a thicker wear layer.
- Cons: can’t be sanded or refinished; quality varies widely between products; heavy furniture can dent it; it needs a very flat subfloor; strong direct sun can cause fading or movement near large windows.
- Tip: “waterproof” describes the plank, not the floor underneath. Standing water can still get through seams and edges to the subfloor.
Engineered hardwood
Engineered hardwood has a real wood top layer bonded to a plywood or composite core. That cross-layered construction makes it more dimensionally stable than solid wood when humidity changes.
- Pros: real wood look and feel; more stable through seasonal humidity swings; many products are approved for installation over concrete slabs and, in some cases, below grade — always per the manufacturer.
- Cons: scratches and dents like any wood floor; not suited to bathrooms or rooms that see standing water; how many times it can be refinished depends on the thickness of the wood layer.
Solid hardwood
Solid hardwood is milled from a single piece of wood. Many older Portland homes still have original oak or fir floors — sometimes hiding under carpet.
- Pros: long lifespan; can be sanded and refinished many times; timeless look that suits Craftsman, bungalow and traditional homes.
- Cons: expands and contracts with moisture; needs proper acclimation and moisture testing; generally not recommended directly over concrete slabs or below grade; installed by nailing to a wood subfloor.
- Tip: if you find original hardwood under old carpet, ask whether it can be refinished before deciding to replace it.
Laminate
Laminate uses a high-resolution printed layer over a dense fiberboard core with a tough protective top layer.
- Pros: very scratch-resistant, budget-friendly, convincing wood looks; newer water-resistant products handle everyday spills better than older laminate.
- Cons: the core can swell if water sits on the seams; it can’t be refinished; it can sound hollow without a good underlayment. Best in living rooms, bedrooms and other dry areas.
What our climate means for your floors
Indoor humidity in Northwest homes swings with the seasons — damp outside air through the rainy months, drier air when the heat is running, and warm summers in between. Wood floors expand and contract with those changes, which is why acclimating the material, leaving proper expansion gaps and using the right underlayment or vapor barrier matter so much.
Many older homes sit over crawl spaces, and moisture there can affect the floor above. Basements and concrete slabs should be moisture-tested before any flooring goes down; the results help decide which products are suitable.
Subfloor prep: the part you don’t see
Squeaks, soft spots, gaps and uneven seams almost always come from the subfloor, not the flooring. A proper installation includes removing the old floor, fixing squeaks and loose spots, leveling high and low areas, checking moisture, and installing the right underlayment or vapor barrier. Then come careful layout, clean cuts around doorways and vents, matching transitions and new baseboards or quarter-round. See what’s included in our flooring installation service.
Choosing by room
- Kitchen: LVP for worry-free spills; engineered hardwood if you want real wood and wipe up promptly.
- Bathrooms and laundry rooms: LVP.
- Basements: LVP, or engineered hardwood that is rated for below-grade use.
- Living and dining rooms: any of the four — solid or engineered hardwood for warmth and long-term value.
- Bedrooms: any; laminate is a cost-effective choice for dry upstairs rooms.
- Stairs: hardwood or LVP with matching stair nosings for a safe, finished edge.
Homes with large dogs usually do best with LVP that has a thick wear layer, or with laminate in dry areas; hardwood will show claw marks over time.
What drives the cost
Flooring prices depend on more than the material. The main cost drivers are the product grade, total square footage, how many rooms, closets and angles are involved, stairs, removal and disposal of the old flooring, subfloor repair and leveling, moving furniture, trim and transitions, and the installation pattern — a herringbone layout takes far more time than straight planks.
Planning a flooring project
If you’re also repainting, the usual order is walls and ceilings first, then flooring, then a final coat or touch-up on baseboards and trim — our interior painting prep checklist explains how to get ready. We can quote painting and flooring together in one estimate across our service area.
Learn more about our flooring installation process, or call (971) 571-4778 and request a free estimate to talk through the right floor for each room.


